7
•Importantsafetyinstructions
When using the product, please remember the information detailed below to avoid the risk of fire and
personal injury:
!
WARNING!
Ensure input DC voltage ≤Max.DC voltage. Over voltage may cause permanent
damage to inverter or other losses, which will not be covered by the warranty!
This chapter contains important safety and operating instructions. Read and keep
this operation guide for future reference.
!
WARNING!
Authorized service personnel must disconnect both AC and DC power from the
Enfinity inverter before attempting any maintenance, cleaning or working on any
circuits connected to the Enfinity inverter.
• BeforeusingtheEnnityinverter,readallinstructionsandcautionarymarkingsontheEnnity
inverter, and all appropriate sections of this guide.
• UseonlyattachmentsrecommendedorsoldbyEnnity.Doingotherwisemayresultinariskofre,
electric shock, or injury to persons.
• Toavoidariskofreandelectricshock,makesurethatexistingwiringisingoodconditionandthatthe
wires are not undersized. Do not operate the Enfinity inverter with damaged or substandard wiring.
• DonotdisassembletheEnnityinverter.Itcontainsnouser-serviceableparts.SeeWarrantyfor
instructions on obtaining service. Attempting to service the Enfinity inverter yourself may result in a
risk of electric shock or fire and will void your warranty.
• Toreducetheriskofelectricshock,authorizedservicepersonnelmustdisconnectbothACandDC
power from the Enfinity inverter before attempting any maintenance, cleaning or working on any
circuits connected to the Enfinity inverter. Turning o controls will not reduce this risk.
• Keepawayfromammable,explosivematerialstoavoidredisaster.
• Theinstallationplaceshouldbeawayfromhumidorcorrosivesubstance.
• Toavoidelectricshockaccident,pleasedonotdisassembletheinverterbecausetherearehigh-
voltage capacitors installed inside the inverter. Fatal high-voltage will remain in the inverter after its
disconnection with grid for 5 minutes.
• Toreducethechanceofshort-circuits,authorizedservicepersonnelmustuseinsulatedtoolswhen
installing or working with this equipment.