EasyManua.ls Logo

EnGenius ENS200 - Technical Specification; Wireless Specification; Hardware Specification; Software Specification

EnGenius ENS200
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRODUCT OVERVIEW TECHNICAL SPECIFICATION
1-4
Technical Specification
Wireless Specification
IEEE802.11b/g/n, 1T1R, 150Mbps
2.400 to 2.484 GHz, programmable upon different country
regulations
Hardware Specification
Physical Interface: 2 x 10/100Mbps LAN Ports, 1 x Reset
Button
Power Supply: Passive PoE, 24V/0.6A Power Adapter
Dimension: 186mm(L) x 100mm(W) x 29mm(H)
Operation Temperature: -20°C ~ 70°C
Embedded high gain directional antenna
Software Specification
Operation Mode: Client Bridge, Access Point, Client
Router, WDS AP, WDS Bridge, WDS Station
Multiple SSID, Preferred SSID
PPPoE, PPTP, L2TP Pass-through
WMM, Traffic Shaping
CLI Interface, SNMP v1/v2c/v3
Recovery Page
Port Forwarding/DMZ

Table of Contents