EnGenius ENS200 - Wi-Fi Protected Access (WPA)

BASIC NETWORK SETTINGS WI-FI PROTECTED ACCESS (WPA)
4-34
Wi-Fi Protected Access (WPA)
Security Mode Select WPA from the drop-down list to begin the
configuration.
Encryption Select Both, TKIP, or AES as the encryption type.
 Both = uses TKIP and AES.
 TKIP = automatic encryption with WPA-PSK; requires pass-
phrase.
 AES = automatic encryption with WPA2-PSK; requires
passphrase.
Radius Server Specify the IP address of the RADIUS server.
Radius Port Specify the port number that your RADIUS server
uses for authentication. Default port is 1812.
Radius Secret Specify RADIUS secret furnished by the
RADIUS server.
Group Key Update Interval Specify how often, in seconds, the group key changes.
Radius Accounting Select to enable or disable RADIUS accounting.
Radius Accounting Server
Radius Accounting Port Specify the port number that your RADIUS accounting server uses for authentication. Default port is 1813.
Radius Accounting Secret Specify RADIUS accounting secret furnished by the RADIUS server.
Interem Accounting Interval Specify the interem accounting interval (60 - 600 seconds).
Click Save to save the changes or Cancel to cancel and return previous settings.
Note:
802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will drops from 802.11n to 802.11g.