BASIC NETWORK SETTINGS CLIENT BRIDGE MODE
4-24
Client Bridge Mode
Client Bridge Mode lets you connect two LAN segments via a wireless link as though they are on the same physical network. Since
the computers are on the same subnet, broadcasts reach all machines. As a result, DHCP information generated by the server reach
all client computers as though the clients residing on one physical network.
Wireless Mode Wireless mode supports 802.11b/
g/n mixed modes.
SSID Specify the SSID if known. This field is
completed automatically if you select an Access
Point in the Site Survey.
Site Survey Scans nearby locations for Access
Points. You can select a discovered Access Point
to establish a connection.
Prefer BSSID Enter the MAC address if known. If
you select an Access Point in the Site Survey, this
field is completed automatically.
Wireless Security See section 8.2 for information.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
To Next Page
Loading...
