EnGenius EnStationACv2 - Connection

36
5 GHz Connection List
Click the connection link under the Overview menu displays
the connection list of clients associated to the AP/CPE’s 5
GHz,alongwiththeMACaddressesandsignalstrengthfor
each client. Clicking Refresh updates the client list.
Note: Only applicable in Access Point and WDS AP
modes.
WDS Link List
Click the connection link under the Overview menu. This
page displays the current status of the WDS link, including
WDS Link ID, MAC Address, Link Status and RSSI.
Note: Only applicable in WDS AP and WDS Bridge modes.
The Realtime section contains the following options:
CPU Loading: 3 minutes CPU loading percentage
information, it displays current loading, average loading
and peak loading status. Left bar is loading percentage;
button is time tracing. Interval is every 3 seconds
Trafc Loading: 5GHzandEthernetportinboundand
outboundtrafcbycurrent,averageandpeaktime.
Connection Realtime