EnGenius EnStationACv2 - Technical Specifications; Physical Interface

8
Operation Modes-EnJet disable
Access Point
Client Bridge
WDS AP
WDS Bridge
WDS Station
Optimal Performance
Distance Control (Ack Timeout)
Multicast Supported
Data Rate Selection
Auto Channel Selection
BSSID Support
AP Time Slot
Station Priority
Easily Management
VLAN Tag / VLAN Pass-through
Guest Network
QoS: Complaint with IEEE 802.11e /WMM
RADIUS Accounting
Wireless STA (Client) connection list
Trafc Shaping (Per SSID)
Intuitive Tools
SNMP v1/v2c/v3 support
MIB I/II, Private MIB
Save Conguration as Default
CLI Support
WiFi-Scheduler/Auto Reboot
E-mail Alert
Standard
IEEE802.11acwave2/a/non5GHz
Antenna
Internal 15.5dBi high gain directional antenna (EnStation5-ACv2/
EnStationACv2)
Internal 13.42dBi high gain directional antenna (ENS500-ACv2)
External 2*5.17dBi detachable antenna (ENS500EXT-ACv2)
Physical Interface
2 x 10/100/1000 Gigabit Ethernet Port with PoE support
EnStation5-ACv2/ENS500-ACv2/ENS500EXT-ACv2 LAN(PoE) Port
supports 24V PoE Input
EnStationACv2 LAN(PoE) Port supports 54V PoE Input
LED Indicator
Power
LAN 1
LAN 2
WLAN
WLAN LED (Weak, Medium, Strong)
Power Requirements
ENH500v3/ENS500EXT-ACv2/ENS500-ACv2/EnStation5-ACv2
Include PoE Adapter, 24V 0.6A
EnStationACv2 Include PoE Adapter, 54V 0.6A
Operation Modes-EnJet enable
Access Point
Client Bridge
WDS AP
WDS Station
Technical Specications