Engl E670 - Page 44

Mains voltage configuration: 230 or 240 Volts
44
The device's mains voltage setting can be adjusted to 100 volts, 115 volts,
120 volts, 230 volts and 240 volts inside the device using plug-in connectors.
The two illustrations of the voltage configuration board below show
the respective configurations for each of the two mains voltages 230 and 240 volts.
IMPORTANT! Read and heed: The device must be opened to set its
mains voltage. This may be done by an authorized professional technician only!
You will void the warranty by opening the device or damaging it by configuring
its voltage incorrectly!
SI2
int.
SI3
int.
Configuration for 240 volt
mains voltage:
Configuration for 230 volt
mains voltage:
SI2
int.
SI3
int.