Engl E670 - Page 45

Mains voltage configuration: 100, 115, 120 Volts
45
The device's mains voltage setting can be adjusted to 100 volts, 115 volts,
120, 230 or 240 volts inside the device using plug-in connectors.
The three illustrations of the voltage configuration board below show
the respective configurations for each of the three mains voltages 100, 115 and 120 volts.
IMPORTANT! Read and heed: The device must be opened to set its
mains voltage. This may be done by an authorized professional technician only!
You will void the warranty by opening the device or damaging it by configuring
its voltage incorrectly!
Configuration for 100 volt
mains voltage:
SI2
int.
SI3
int.
Configuration for 120 volt
mains voltage:
SI2
int.
SI3
int.
Configuration for 115 volt
mains voltage:
SI2
int.
SI3
int.