Need help?Do you have a question about the Engler DRILL-AIRE PLUS and is the answer not in the manual?
Operating Environment| normal operating pressure | 80 PSI |
|---|---|
| maximum operating pressure | 90 PSI |
| minimum operating pressure | 40 PSI |
Handpiece Specifications| low speed handpiece speed | 5000 RPM to 20, 000 RPM |
|---|---|
| low speed handpiece pressure | 60 PSI |
| high speed handpiece speed | 360, 000 RPM |
| high speed handpiece pressure | 25 – 32 PSI |
Power| power supply input voltage | 100-240 V |
|---|---|
| power supply input current | 1.5A |
| power supply frequency | 50 - 60Hz |
| power supply output voltage | 24 VDC |
| power supply output current | 2.5 Amps |
Weight and Dimensions| control box dimensions | 9” X 4” X 6” |
|---|---|
| net weight | 8 lbs |
| shipping weight | 14 lbs |
| shipping box dimensions | 14” X 14” X 14" |
To Next Page
