INSTRUCTIONS FOR OPERATION AND MAINTENANCE
REGULAR OPERATIONAL CONSIDERATIONS
The low speed polisher and the high speed drill must be lubricated daily when in use. Remove the
quick disconnect hose and spray lubricant in the smaller of the two larger ports of the handpiece.
The straight handpiece (if available) must be lubricated daily. Note: Short grip Doriot low speed
handpiece does not use a straight handpiece.
The prophy angle head must be removed, cleaned with soap and water, dried, and lubricated at the
end of each day depending on use, then re-assembled.
All handpiece holders and three way syringe must be kept cleaned.
One can of Lares Handpiece Conditioner spray lubricant is included with every Drill – Aire Plus Mini.
For the best care and maintenance order the Drill - Aire Plus Mini deluxe maintenance kit which
includes Lares Handpiece Conditioner from Engler Engineering Corporation (optional, not included
with unit).
MAINTENANCE KITS
There are maintenance kits available for the Drill - Aire Plus Mini (optional, not included with unit).
These kits are essential to keep your unit working properly. Each kit varies. Please make sure you
specify your systems configuration and part number when ordering the kit.
# KIT MINI BASIC , The standard kit, includes One Step conditioner for the low and high speed
handpieces, and port cleaning tool necessary to perform basic maintenance.
# KIT MINI DELUXE , includes replacement parts that are normal wear and tear items such as F.G.
Bur kit, replacement O-rings for high and low speed handpieces in addition to items in the standard
kit.
12
To Next Page
Loading...