TECHNICAL SPECIFICATIONS:
Input pressure (compressed air, bottled air, or nitrogen):
Normal Operating Pressure: 80 PSI
Maximum 90 PSI
Minimum 40 PSI
(62 liters / minute or 2.2scfm for 360,000 RPM
Low speed handpiece:
5000 RPM (for prophy) to 20,000 RPM max. @ 60 PSI max. to the handpiece
High speed handpiece:
360,000 RPM max. @ 25 – 32 PSI max. to the handpiece
Power supply:
Input: 100-240 V ~, 1.5A, 50 - 60Hz
Output: 24 VDC, 2.5 Amps
Control box dimensions:
9” X 4” X 6”
Net weight:
8 lbs.
Shipping weight:
14 lbs.
Shipping box dimensions:
14” X 14” X 14"
Engler Engineering Corporation
1099 East 47th Street, Hialeah, Florida 33013
800-445-8581 – 305-688-8581 – FAX 305-685-7671
Web site: www.englerusa.com Help site: www.engler411.com
30
To Previous Page
Loading...
