LOW SPEED HANDPIECE
The Drill - Aire Plus is equipped with the Doriot One-piece Handpiece.
Maximum air input, 60 PSI Maximum RPM: 20,000
Normal operating RPM, 500 – 1500 RPM – (as slow as possible without splattering paste)
Attachments: Accepts both handpiece burs and Doriot / U-type attachments (prophy angle)
It is used with a prophy angle to polish the teeth after a scaling procedure. Use only approved
attachments and polishing compounds. Follow all manufacturers recommendations.
The water should be turned OFF when using the low speed handpiece (polisher).
No straight handpiece is used with the short-grip Doriot one-piece handpiece. The prophy angle
attaches directly to the motor.
AIR / WATER SYRINGE
The three-way air / water syringe features
Well balanced design, and smooth styling for comfortable use.
Easy release for a speedy exchange of tips.
Fully autoclavable tips.
This handpiece allows the operator the ability to rinse the operative site with a stream of water or mist
or dry / blow debris with a stream of air.
Press-in here to release tip
9
To Next Page
Loading...
