3
• Use only the power supply provided with your Merlin. Using an
unauthorized power supply may cause serious damage to Merlin’s electronic
components.
To Move Merlin to Another Location
• If you are repositioning Merlin a short distance across a desk or table, make
sure you do not pull on any power cords or connector cables.
• If you are moving the system to a different location within your home
or office, it is recommended that Merlin and the monitor are moved
separately, not with the monitor on Merlin’s upper platform.
• Disconnect and secure all power and video cables and lock the X-Y table
before moving the unit.
• Carry Merlin only by the two recessed handles located on either side of its base.
• Situate Merlin securely in its new location before replacing the monitor on
the upper platform.
Caring for Merlin
• Always turn the power OFF for both Merlin and the monitor when the
system is not in use.
• Always turn the power OFF before cleaning Merlin.
• The plastic surfaces of Merlin can be cleaned with a soft dry cloth or an
electrostatic dusting wipe. DO NOT use liquid cleaners.
• The protective glass covering the camera can be cleaned as needed with the
lens cloth provided within your Merlin’s packaging.
Safety and Care
To Next Page
Loading...
