Merlin Power Button
The Power button on your Merlin is located on the far right of the control
panel. (#1 above)
• Press the Power button. A green light will illuminate, indicating the power is on.
Power Button on an Enhanced Vision Monitor
On a monitor supplied by Enhanced Vision, the Power button is located in
the lower right front corner of the monitor. (#2 above)
• Press the Power button. A light will illuminate, indicating the power is on.
If your Merlin and monitor are plugged into a power strip/surge protector,
make sure its power switch is turned on before attempting to turn on
Merlin or your monitor. If the power strip/surge protector comes with a
circuit breaker, make sure the circuit breaker has been reset before
attempting to turn on Merlin or your monitor.
9
Turning on Merlin
#1
#2
To Next Page
Loading...
