Enko CCS 3100 - CCS3100 Parameter List Overview; Parameter List Structure; Pressure and Timing Parameters

CCS3100
20
User Manual R0.2
Fault Definition: Indicates that the compressor is stopped and restarted within a period that is longer than the
amount set to the "P158 Maximum Startup" parameter. It is a malfunction that stops the compressor rapidly.
Possible Causes and required actions: Stopping and running for a period that is longer than the specified time may
indicate a problem in the system. The value of the relevant parameter may not be suitable for the system.
Power fault automatic run (Power Intrpt)
Warning Definition: Power cut and come back while the compressor is running, the device will restart the
compressor at the end of the time set to the "P27 Power Cut Restart Delay" parameter. If automatic restart is not
required, "0" value is entered to the relevant parameter.
2. Parameters and parameter descriptions
2.1. Parameter List
Cat.
P
no
Parameter Definition
in the Device
Parameter
Description
Min
Max
Def
Explanation
Birim
Level
Pressure
2
Idle Pressure
Idle Pressure
0,0
16,0
7,5
Bar
1
Pressure
3
Onload Pressure
load Pressure
0,0
16,0
6,0
Bar
1
Pressure
4
Line Alarm Value
Discharge Pressure
Alarm Level
0,0
16,0
8,5
Bar
2
Pressure
5
Line Warn Value
Discharge Pressure
Warning Level
0,0
16,0
8,0
Bar
1
Pressure
6
Screw Sensor
Screw Sensor Enable
0,0
1,0
1,0
0:Passive 1:Active
2
Pressure
7
Min Screw Press.
Low Level Screw
Pressure
0,0
16,0
0,5
Bar
1
Pressure
8
ScrewPress Alarm
Screw Pressure Fail
Alarm
0,0
16,0
8,6
Bar
2
Pressure
9
ScrewPress Warn
Screw Pressure
Warning Alarm
0,0
16,0
8,1
Bar
1
Pressure
10
Pressure Unit
Pressure Unit
0,0
1,0
0,0
0:Bar 1:PSI
1
Pressure
11
DeltaPress Alarm
Pressure Difference
Fail Alarm
0,0
16,0
2,4
Bar
1
Pressure
12
DeltaPress Warn
Pressure Difference
Warning Alarm
0,0
16,0
2,0
Bar
1
Pressure
13
SufficiencyPress
Difference Pressure
Limit Value
0,0
16,0
4,8
Bar
1
Pressure
14
Stand.Press Load
Load Standard
Pressure Value
0,0
16,0
7,5
Bar
2
Timing
21
Start Delay
Start Delay Time
2,0
60,0
5,0
sec
1
Timing
22
Stopping Time
Stopping Time
0,0
180,0
20,0
sec
1
Timing
23
Air Discharge
Air Discharge Time
Duration
0,0
60,0
10,0
sec
1
Timing
24
Idle Working
Idle Working Time
Duration
0,0
300,0
10,0
sec
1
Timing
25
PassAgain Onload
Reload Time Delay
0,0
60,0
5,0
sec
1
Timing
26
"Auto Waiting
Auto Waiting Delay
0,0
1200,0
180,0
sec
1
Timing
27
Power Cut
power Fail Restart
Delay Time
0,0
60,0
5,0
sec
1
Timing
28
Star Duration
Star Feed Operation
Time
2,0
30,0
5,0
sec
2
Timing
29
"Main Contactor
Main Contactor on
Delay Time
10,0
100,0
30,0
msec
3
Timing
30
Delta Transfer
Start-Delta Transfer
Time
10,0
100,0
50,0
msec
3
Timing
31
Preheat Onload
Pre-Heat On-Load
Time
0,0
60,0
10,0
sec
1
Timing
32
Preheat Idle
Pre-heat Off-Load
Time
1,0
120,0
15,0
sec
1
Timing
33
Line Press Alarm
Discharge Pressure
Fail Alarm Delay
0,0
30,0
3,0
sec
1