enphase Envoy User Manual

Envoy Installation and Operation
 2014 Enphase Energy Inc. 141-00011 Rev 05
43
If an alternate device grid profile has been applied, the following screen appears.
4. Select a Country regulatory specification.
5. Select a Grid profile appropriate for your region.
6. Make note of the Envoy serial number and the authorization number on the screen. You will
need this information in the following steps.
7. Click the link to the Enlighten website. (If you do not already have an account, click Enlighten
Login at the Enlighten website to register.) Note that this link will not appear if the Envoy shows
“-Web” on the LCD screen.
NOTE: If the Envoy displays “-Web”, see “Network Basics and Troubleshooting” on page 31.
8. Once logged in at the Enlighten website, locate the Grid Profile Change Token widget. If you
don’t see this widget add it now:
 Click Add a widget.
 Select Grid Profile Change Token.

enphase Envoy Specifications

General

Model	Envoy
Category	Gateway
Compatibility	Enphase Microinverters
Communication	Wi-Fi, Ethernet
Networking	IEEE 802.11 b/g/n
Operating Temperature	-40°C to +65°C
Enclosure Rating	IP30
Power Supply	100-240 VAC
Power Consumption	5W typical