enphase Envoy User Manual

Envoy Installation and Operation
 2014 Enphase Energy Inc. 141-00011 Rev 05
5
Important Information
Read this First
 Follow the instructions in this manual. These instructions are key to the installation and
maintenance of the Enphase Envoy® Communications Gateway (Envoy).
 To ensure the safe installation and operation of the Envoy, note the following safety
symbols that appear throughout this document to indicate dangerous conditions and
important safety instructions.
WARNING! This indicates a situation where failure to follow instructions may be a safety hazard
or cause equipment malfunction. Use extreme caution and follow instructions carefully.
NOTE: This indicates information that is very important for optimal system operation. Follow
instructions closely.
Safety Instructions
 Perform all electrical installations in accordance with all local electrical codes and the National
Electrical Code (NEC), ANSI/NFPA 70.
 Do not attempt to repair the Envoy; it contains no user-serviceable parts. Tampering with or
opening the Envoy will void the warranty. If the Envoy fails, contact Enphase Customer Support
for assistance (support@enphaseenergy.com).
 Warranty void if cover removed.
 Refer servicing to qualified personnel.
 Before installing or using the Envoy, read all instructions and cautionary markings in the
technical description and on the Envoy.
Audience
This manual is intended for use by professional installation and maintenance personnel.

enphase Envoy Specifications

General

Brand	enphase
Model	Envoy
Category	Gateway
Language	English