IQ8MC/IQ8AC/IQ8HC Installation and Operation Manual
4 © 2023 Enphase Energy Inc. All rights reserved. September 2023
IOM-00029-1.0
Important safety information
Read this first
This manual contains important instructions for use during the installation and maintenance of the IQ8 Series
Microinverters.
IMPORTANT: Enphase IQ8 Series Microinverters listed in this manual require the IQ Cable. An IQ
Gateway is required to monitor the performance and, where required, provide control of the IQ8
Series Microinverters.
Product labels
The following symbols appear on the product label and are described here:
Safety and advisory symbols
To reduce the risk of electric shock and to make sure the safe installation and operation of the IQ8 Series
Microinverters System, the following safety symbols appear throughout this document to indicate dangerous
conditions and important safety instructions.
DANGER:
This indicates a hazardous situation, which, if not avoided, will result in death
or serious injury.
WARNING:
This indicates a situation where failure to follow instructions may be a safety
hazard or cause equipment malfunction. Use extreme caution and follow
instructions carefully.
WARNING:
This indicates a situation where failure to follow instructions may result in burn
injury.
NOTE:
This indicates information that is very important for optimal system operation.
Follow instructions closely.
DANGER: Refer to safety instructions
DANGER: Risk of electric shock
To Next Page
Loading...
Need help?
General
