Enseo Hd2000 RF - Product Specification; FCC Statement & License Acknowledgement

page 25
Product Specification
HD2000 RF
DETAILS COMMENTS
6.26"x11.5"x1.1"
12.5WattsTypical ACPowerAdapter(12vDC)
QAM/8VSB
NTSC
Pro:Idiom
One
Ethernet RF45 Disabledinfirmware
CompositeVideo 1xRCA(Yellow)
AudioInput 1x3.5mmMinijack
USB 2xUSBTypeA USB2.0
1XDB-9 Specialpin-out/SerialControl
WithHDCP
S/PDIF VariableAudioOut
RCAL/R VariableAudioOut
RiskAssessmentbasedonIEC60950 UsesULapprovedACadapter
FCC(ClassB)
RoHS
OSD Co-ordinateFont,Color&Position
RJ12Connector SmartPort™,MTI,MPI,Serialprotocol
RJ12Connector SmartPort™/MTIprotocol
ITEMS
Dimensions
TotalPowerConsumption
Tuner
Digital
Analog
Decryption
RFInput
Inputs
SerialPort
HDMI
DigitalAudio
AnalogAudio
Outputs
Control
Ports
Display
PPV
English
Standard
ProductSafety
EMC
Environmental
FCC Statement & License Acknowledgement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.