Enseo Hd2000 RF - Channel Options and Management

page 8
Channel Options
TheHD2000RFsupportsanaloganddigitalchannelsfromcableorover-the-airsources(NTSC/QAM/8VSB).Inad-
dition,theHD2000RFcanmapIPstreams(UDP/RTSP/RTP)tochannelsforablendedIP/RFexperience.
Note:
• Air–Toreceiveover-the-airchannels,anantennaandadditionalequipmentmayberequired
• Cable–Digitalcablechannelsmaynotbeaccessibleifconditionalaccessorsubscriptionsarerequired
Tuning Mode
OptioniseitherAir(Over-The-Air)orCable.ThissettingcanbechangedusingRIGHTarrowbuttontoentertheset-
tingandusingUPorDOWNselecteitherAirorCable.Tosavethesetting,presstheLEFTarrowbutton.
Edit Channel List
Asubmenuwithfunctionstoadd,deleteandmanageinformationregardingchannels
Clear Channel List
Usedtodeletethestoredchannellistprogramming
Auto Channel Install
Usedtoscanandinstallchannels.Analogchannelswillbeautomaticallyenteredintothechannelring,butdigital
channelsmustbeenteredmanually.
Digital Channel Search
Usedtosearchfordigitalchannelsavailable.Note,thesechannelswillnotbeautomaticallyenteredintothechannel
lineup.DigitalchannelsrequiremanualentryusingtheEditChannelListmenu.
Image 2 – Channel Options Menu