Enseo Hd2000 RF - Menus and Configuration Options

page 6
LG Escape Sequence*
*If you incorrectly selected a panel type or use another manufacturer’s TV, use the fol-
lowing method to reset the HD2000 RF to Generic Mode:
1. MakesurenoTVcontrolcableisconnectedtotheHD2000RF.
2. Makeallotherconnections(HDMI,network,RF,etc.),butDONOTAPPLYACtotheHD2000RFyet.
3. TurnontheTVusingthemanufacturer’sremote.
4. ApplyACtotheHD2000RF.
5. WhiletheHD2000RFbootsup,depressandholdtheUPbuttonoftheEnseoremote.
• TheHD2000RFwilldetecttheUPbuttonIR,switchtoGenericMode,thenpowerup.
• Afterabout1minuteyouwillseethestartupchanneldisplayedontheTV.
6. UsingtheEnseoremote,entertheServiceMenuandselecttheappropriatetypeforyourTV(None,Auto,PT2
orPT4).TheHD2000RFwillreboot.
7. WhiletheHD2000RFreboots,connectthecontrolcable,ifapplicable.
Menus/Configuration
Supported Remote Controls
TheHD2000RFisdesignedtofunctionwitheithertheEnseoremotecontrolthatshippedwiththedevice,aremote
controlprovidedbythemanufacturer,oraLodgingremotecontrolprovidedbytheVideo-On-Demandprovider.The
EnseoremotecontrolcanbeusedforsettinguptheHD2000RF.
This remote control includes direct button access for the follow key functions:
 BUTTON: FUNCTION:
 Setup Access the setup menus for the HD2000RF, including channelmapping of digital
  channelstoanalogchannelnumbers