Enterasys C1H124-24 - Connecting to a Modem

Connecting to Console Port for Local Management
3-20 Hardware Installation
5. Configure your VT emulation package with the following parameters:
When these parameters are set, the Startup screen will display. Proceed to Section 3.7 to complete
the installation.
Figure 3-16 Connecting to a Modem
Parameter Setting
Mode 7 Bit Control
Transmit Transmit=9600
Bits Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
UTP straight-through cable with RJ45
connectors
RJ45-to-DB25 adapter Remote modem
RJ45 Console port on C1H124-48 Local modem
CPU
RPS 149
51
250 52
1
2
52
50
49
51
Ä
3831_00_11
Á
Â
À
Ã