Entron iPAK2 Technical Manual

iPAK2 Technical Manual 2
iPAK2 Technical Manual
Copyright © 2019 BF ENTRON Ltd. and/or its affiliates. All rights reserved.
 The information in this manual is subject to change.
 BF ENTRON assumes no responsibility for any errors that may appear in this manual.
 BF ENTRON assumes no responsibility for any injury, loss or damage caused by improper installation,
use or application of the iPAK2 welding control
 The reproduction, transmission or use of this document or contents is not permitted without express
authority from BF ENTRON
 BF ENTRON's trademarks and trade dress may not be used in connection with any product or service
that is not BF ENTRON's, in any manner that is likely to cause confusion among customers or in any
manner that disparages or discredits BF ENTRON. All other trademarks not owned by BF ENTRON are
the property of their respective owners, who may or may not be affiliated with, connected to, or
sponsored by BF ENTRON.
BF ENTRON Ltd.
Building 80 Bay 1
First Avenue
The Pensnett Estate
Kingswinford
West Midlands DY6 7FQ
England
Phone +44 (0)1384 455401 • Fax +44 (0)1384 455551
www.entroncontrols.com
Issue Date Comment
2.00 27-02-19 Initial release
2.00.01 13-06-19 Minor errata corrected
2.00.02 19-06-19 Corrected weld program time range.
2.01 8-08-19 Added Presqueeze to all modes

Entron iPAK2 Specifications

General

Brand	Entron
Model	iPAK2
Category	Controller
Language	English