Sigma DS1, DS2, DS3 Card Printer User’s Guide 17
Printer Controls
The front panel of the printer provides the controls you use to operate the printer. The front
panel controls are described in detail in the following sections.
Power Button
Press the POWER button for 1 to 2 seconds to power on the printer. The printer LCD displays
Initializing while the printer performs system checks and powers on.
To power off the printer, press the P
OWER button for 1 to 2 seconds until the printer begins to shut
down.
To power off the printer while processing cards, press the button for 2 or more seconds. Card jobs
in the printer do not complete.
Down Arrow, Up Arrow, and Enter Key
Use the arrow keys to move through the printer menu system, and the ENTER key to make a
selection.
Press the up or down arrow key while the LCD panel displays Ready to display additional
information about the printer on line 3, including the printer serial number, IP address, supply
part numbers, and firmware version. If the system includes optional components, information
about those options also displays. If you do not press a key for 30 seconds, the LCD panel returns
to the default Ready message.
Do not unplug the printer power cord to power off the printer.
If multiple connection types are present, (for example, USB, IPv4, Wi-Fi), only
the first connection address displays.
To see the IPv6 addresses available to the printer, you must use the LCD Status
menu. Refer to “Retrieve an IPv6 Address” on page 23.
Power
Button
Up Arrow
Down Arrow
Enter
User Button
LCD Panel
To Next Page
Loading...
Need help?
General
