Sigma DS4 and DS4-ES1 Instant Financial Issuance System 19
Option Configuration Code
Printer Model Features H0,H00=No Hopper (Multi-Hopper Ready)
H4=DS4 Printer 125-Card Input Hopper with additional features
(locks and card sensors)
H7=DS4 Kiosk
H18=DS4 with Manual Feed Hopper
Main Board Ex=Main Board option, where x indicates your printer model.
Duplex D0=Simplex, Duplex Upgrade Ready
D1=Duplex
D2=Duplex Only
blank=Simplex
Magnetic Stripe M1=ISO
M2=JIS
blank=No Magnetic Stripe Option
Smart Card Sx=Smart Card option, where x indicates the type of smart card
reader installed in the printer (refer to the printer’s Installation
and Administrator’s Guide for a list of smart card readers
supported by the printer and their option codes)
blank=No Smart Card option
Rear Modularity R1=Rear Modularity
blank=No Modularity
Printing blank=300 DPI Printhead
Locks L1=Locks
L2=Mechanical Lock
blank=No Locks
Secure Scramble U1=Secure Scramble
blank=No Secure Scramble
Covers Cx=Covers option, where x indicates your printer model.
To Next Page
Loading...
Need help?
General
