Entrust Sigma DS4-ES1 - 118: Print Ribbon Type Problem; 119: Print Ribbon Not Supported; 120: User Paused the Printer

74 Troubleshooting
118: Print ribbon type problem
The printer cannot use the ribbon installed. The card will be canceled.
Use ribbon designed for this printer.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
 Purchase ribbon from your dealer or authorized reseller.
 Use the Printer Dashboard to update the printer firmware, which may add support for new
ribbon types.
119: Print ribbon not supported
The printer cannot use the ribbon installed. The card will be canceled.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
 Purchase ribbon from your dealer or authorized reseller.
 Use the Printer Dashboard to update the printer firmware, which may add support for new
ribbon types.
120: User paused the printer
The printer was paused while printing.
To complete the current card press the printer’s U
SER button.
HINTS & TIPS
If the user pressed the USER button for several seconds, the card has been canceled.