code
.
EnverBridge Installation
Step 10. WIFI Configuration
Option
1. Use Enverview app to configure WiFi
Note: Please place the EVT400 as close as possible to the router.
The EVT400 has built-in WIFI modular which is able to connect the router directly.
Web Portal address: https://www.envertecportal.com/
To access our application, you can scan the QR code provided below or search
for 'Enverview' on Google Play Store or Apple Store for download.
a. Open Enverview app and click WiFi. Select “EVT” to connect.
b. Select a 2.4GHz WiFi network, and return to the app. Then enter the password
of 2.4GHz WiFi network. Please allow Enverview app to use your location. Or
you will fail to configure WiFi.
N
ote:
1. Please carefully check the WiFi password, such as extra spaces.
2. Ensure that the WiFi name and password do not contain , ; = or other special
characters.
3. Please ensure that the current network your phone connect to is 2.4GHz WiFi,
and the connection between your router and the Internet is in good condition.
c. C
onnect the network whose name is as same as your EVT’s SN, and return to
the app. Please allow Enverview app to find and connect to devices on your
local network. If not, it also causes configuration failure.
Note: When configuring WiFi, make sure you keep staying on the current
To Next Page
Loading...
Need help?
General
