5. Fill in the corresponding Wi-Fi password and press "Save".
6. After the above operation, click "Restart". It will restart after 5 seconds.
Note: If more than one microinverter needs to be connected to Wi-Fi,
configure one microinverter first.
Step 11. Monitoring through EnverBridge(Optional)
1) Register a new account by app or website.
Option 1. Visit www.envertecportal.com. Click Sign Up. Fill in the
account information to finish registration.
Option 2. Use the app “Enverview” to register
To Next Page
Loading...
Need help?
General
