27
GB
Attaching the machine
• Fasten the ake ice machine to the place of
installation.
• Unit not connected to the power or water
supply.
• Take o the hood to fasten the unit.
• Leave at least 150 mm between the wall and
all sides of the unit.
Fig. 5
Mounting in the ground
• Mark the fastening points through the oor.
• Drill an appropriately sized hole into the fa-
stening points and fasten the unit.
• Put the hood back on
Aligning the machine
• Put up the ake ice machine at its intended
place.
• Unit not connected to the power or water
supply.
• Use a spirit level to ensure that it stands ho-
rizontally.
Fig. 6
Fig. 7
To Next Page
Loading...