Tilting Backward
To tilt backward, push the control lever (3) in direction (B).
4.Left - Right Sideshift
The references to left and right are based on the load handler as viewed from the
operator’s position.
Sideshift Left
Push the control lever (4) in direction (F).
Sideshift Right
Push the control lever (4) in direction (B).
3.5 Parking the truck securely
When you leave the truck it must be securely parked even if you only intend to leave it
for a short time.
• Lower the load completely and position it
horizontally.
• Retract the mast support fully.
• Turn off the key switch and remove the key(1).
To Next Page
Loading...
