Only use clean containers when filling up with consumables. Do not mix consumables
of different grades. The only exception to this is when mixing is expressly stipulated in
the Operating Instructions.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent/consumable mixture must be disposed of in
accordance with regulations.
5.3.3 Maintenance Instructions
Prepare the truck for maintenance and repairs
All necessary safety measures must be taken to avoid accidents when carrying out
maintenance and repairs. The following preparations must be made:
• Park the truck securely (See 3.5 Parking the truck securely ).
• Remove the key to prevent the truck from accidentally starting.
• When working under a raised lift truck, secure it to prevent it from tipping or sliding
away.
Replacing the drive wheel
The drive wheel must only be replaced by authorised service personnel.
Check the hydraulic oil level
It is going to add hydraulic oil when you heard explosion sound from pipe during
lifting.
• Prepare the truck for maintenance and repairs
( See 5.3.3 Maintenance Instructions ).
• Opening the cover.
• Add hydraulic oil of the correct grade ( See
5.3.2 Lubrication Schedule ) .
Add hydraulic oil till you cant hear explosion sound during lifting.
Installation is the reverse order.
Check transmission oil level
• Prepare the truck for maintenance and repairs (See 5.3.3 Maintenance
Instructions ).
• Open the cover (See 5.3.3 Maintenance
To Next Page
Loading...
