3.3 Run the truck
3.3.1 Checking and Preparing
Checks and operations to be performed before starting daily work
• Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
• Visually inspect the battery attachment and cable connections.
• Check the load handler for visible damage such as cracks, bent or severely worn
load forks.
• Test the warning device.
• Make sure the load chains are evenly
tensioned.
• Check whether the normal function of all
safety devices.
3.3.2 To prepare the truck for operation
• Insert the key in the key switch and turn it to the “ON” position .
• Test horn.
• Check the operation of the foot switch.
Warning!
Before the truck can be
commissioned, operated or a load unit
lifted, the driver must ensure that there
is nobody within the hazardous area.
To Next Page
Loading...
