4.3 Exposing the battery
• Preparing for Operation (See 3.3.4 To prepare the truck for operation ).
• Move the control lever (2) in the arrow direction. Move the mast holder as far as the
stop in the battery direction(B) and release the control lever (2) (the mast is now in its
limit position).
• Insert the battery lock shaft.
• Move the control lever (2) in the arrow direction. Move the mast holder as far as the
stop in the battery direction(F) and release the control lever (2) (the mast is now in its
limit position).The battery is desperate from the frame.
• Release the battery lock shaft.
• Turn the key switch off.
Warning!
Before starting up the truck again, the
battery trolley must be restored to its
initial position.
To Next Page
Loading...
