3
2. Introduction
IPower series is a kind of pure sine wave inverter which can convert.
12/24/48VDC to 220/230VAC(or 110/120VAC). Industrial design,
compared with the civil design, has a wider operating temperature,
easy installation and operation. The wide input voltage range is
ideal for solar system application. The inverter can be applied in
many fields, such as household emergency lighting system, vehicle
mounted system and small field power supply etc.
Features:
Safe design with input and output electrical isolation
Adoption of advanced SPWM technology, pure sine wave output
Optional output voltage 220/230VAC(or 110/120VAC), choosing
by DIP switch
LED indicators for fault status and working status
Lower No-load consumption
Max. efficiency up to 95%(IP2000-22, IP2000-42)
①
Input protection: Over voltage protection, low voltage protection
Output protection: Over load protection, short circuit protection
Over temperature protection: Temperature-controlled Fan
Ventilation; Inverter turns off automatically when overheating
Operational USB output 5VDC/1A
Operational RS485 communication port
②
① The efficiency is tested at rated input voltage,220V output with
resistive load, 25℃ Ambient temperature,1500W and higher version
② 1000W and higher version support RS485 communication port
optional.
To Next Page
Loading...
