Please set Light ON/OFF, Test mode, and Manual mode via Timer1. Timer2 will be
disabled and display "2 n ".
② Load mode setting
Load mode setting by PC software
Connect the controller's RJ45 interface to the PC's USB interface via a USB to RS485 cable (model:
CC-USB-RS485-150U). Set the load mode by the PC software. Refer to the cloud platform manual for
detail.
Load mode setting by APP
Connect the controller to the WIFI module through a standard network cable or connect to the Bluetooth
module by Bluetooth signal. Set the load mode by the APP. Refer to the cloud APP manual for details.
MT50 Setting
To Next Page
Loading...
Need help?
General
