Copyright© 2022 SolarV GmbH All rights reserved.
2
y User-friendly buttons for comfortable and convenient operation
y Master and slave RS485 communication modules design, reading the load or inverter
operating data
y Control the inverter switch through the relay interface
y Provide 5VDC power through the dual USB output interface to charge electronic devices
c For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the
battery type is "USE."
1.2 Characteristics
ʕ
Load Terminals
Ƞ
Ƞ If the temperature sensor is short-circuited or damaged, the controller will charge
or discharge at the default temperature setting of 25 ºC.
Figure 1 Product Characteristics
To Next Page
Loading...
Need help?
General
