EPH Controls CP4 V2 - Copy Function; Temporary Override

26
RFRP
V2
Room Thermostat CP4
V2
Copy Function
Copy function may only be used if the thermostat is in the 7d mode.
Press
PROG
. Select the day of the week you want to copy from.
Press
BOOST
.
The day of the week that you have selected will be shown with ‘COPY’.
The next day will begin to ash on the top of the screen.
Press
+
to copy the times and temperatures to that day.
Press
to skip a day.
You can copy to multiple days by using
+
.
Press
when copying has been completed.
When in AUTO mode, press
+
or to adjust the temperature
setpoint. ‘OVERRIDE’ will appear on the screen.
Press
or after 5 seconds the thermostat will operate to this
temperature, until the next switching time.
To cancel temporary override, press
AUTO
to return to the automatic mode.
Temporary Override