EPH Controls CP4 V2 - P0 2 Setting High & Low Limits

37
RFRP
V2
Room Thermostat CP4
V2
This menu allows the installer to change the minimum and maximum
temperatures to between 5...35°C.
Press and hold
PROG
and for 5 seconds.
‘P01’ will appear on the screen.
Press
+
until ‘P02 & HI LO’ appears on the screen.
Press
to select.
‘HI’ appears on the screen, the temperature will begin to ash.
Press
+
or to select the high limit for the thermostat.
Press
to conrm.
‘LO’ appears on the screen, the temperature will begin to ash.
Press
+
or to select the low limit for the thermostat.
Press
AUTO
once to return to the menu or twice to return to normal
operation.
P0 2 Setting High & Low Limits
Hi 35˚C and Lo 5˚C