EPH Controls CP4 V2 - P0 8 PIN Lock

43
RFRP
V2
Room Thermostat CP4
V2
This function allows the user to put a PIN lock on the thermostat.
There are two options available.
‘OPt 01’. The thermostat is fully locked.
‘OPt 02’. This will reduce the functionality of the thermostat.
The user will be able to change the mode between AUTO and OFF.
Set Up the PIN
Press and hold
PROG
and for 5 seconds.
‘P01’ will appear on the screen.
Press
+
until ‘P08 & PIn’ appears on the screen.
Press
+
. ‘OFF’ will appear on the screen.
Press
+
to select ON.
Press
. Press
+
to select ‘OPt 01’ or ‘OPt 02’.
Press
+
. ‘0000’ will ash on the screen.
Press
+
to set the value for the rst digit.
Press
to conrm and move to the next PIN digit.
When the last digit of the PIN is set, press
.
P0 8 PIN Lock OFF