1. Clean the hydraulic breaker carefully.
2. Dismount the working tool and lubricate the
front part of the piston, bushing and the tool
retainer lock.
3. Store the hydraulic breaker in a dry place.
Disposal
A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative
influence on the environment is kept as low as
possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. The
remaining hydraulic oil must be deposited and any
negative influence on the environment is to be kept
as low as possible.
Safety and operating instructions SB 52, 102, 152, 202, 302, 302Tunnel, 452, 452Tunnel,
552
22 © Construction Tools PC AB | 9800 0648 01 | 2018-01-01
Original instructions
To Next Page
Loading...
