SmartROC T35/T40 3 Risks and Hazards
12 No: 5966599819.1.5966707083 en-US
3.7 Wire Rope Break Hazard
Wire Rope Break Hazard
Breakage of winch wire rope can cause a risk of tipping, sliding, or whipping.
To minimize risk:
• Always perform the checks described in the operation instructions before using the
winch.
3.8 Pressurized Systems Hazard
Leaking fluid systems can cause fluid injection into flesh and erosion of flesh.
How to minimize the risk:
• Make sure that the system is depressurized before maintenance work is started.
• Replace worn hoses.
• Never replace high-pressure hoses with hoses of lower quality than the original.
• Never replace high-pressure hoses with hoses fitted with removable couplings.
3.9 Hazard Zone
Hazard zones are areas within or around the machine in which a person can be exposed to
a hazard. Take necessary precautions while working within a hazard zone.
Hazard Zone during Tramming
To Next Page
Loading...
Need help?
General
