SmartROC T35/T40 8 Signs
35 No: 5966599819.1.5966707083 en-US
8 Signs
8.1 General Guidelines
• It is essential that all machine signs are in correct locations, are clean and fully legible.
• To clean a sign, use only a soft cloth, water, and soap. Do not use solvent, gasoline,
and the like.
• Replace any missing or damaged signs. Contact your Epiroc representative for new
safety signs.
8.2 Warning Signs
Image Description
Danger from swinging and crushing parts.
Can cause severe injuries.
Keep away from hazardous areas during operation.
Danger from moving and rotating parts.
Could cause severe injuries.
Automatic operation.
Keep away from hazardous areas during operation.
Danger from high air pressure.
Can cause severe injuries.
Release pressure before removing the cap or lid.
Burn hazard, hot surface
Can cause severe injuries.
Danger of scalding and pressure.
Can cause severe injuries.
Release pressure before removing the cap or lid.
Danger of tipping over if permitted inclination angles are exceeded.
Incorrect handling can cause personal injury and damage to the machine.
To Next Page
Loading...
Need help?
General
