SmartROC T35/T40 8 Signs
39 No: 5966599819.1.5966707083 en-US
8.7 Data Plate
Example of a Data Plate
!
NOTE: The data plate that is installed on the machine varies depending on the type,
specification, and territory in which the machine is operated.
The data plate indicates if the machine is CE certified or EAC certified. If no CE or EAC
marking is present on the data plate, the machine is neither CE or EAC certified.
8.8 Type Designation Signs for Ordering Spare Parts
Type designation signs are posted on the larger components. The type designation and se-
rial number must always be stated when ordering spare parts or making inquiries regarding
the machine. Type designations and serial numbers are also specified in a separate docu-
ment, Machine Identification (MI). Spare parts can be ordered from Epiroc.
To Next Page
Loading...
Need help?
General
