EPS IPES-IR3 - IECEx Certification Details; Ingress Protection Rating (IP66)

820-0003
IPES IR3 Flame Detector
Operating Manual
Page 30 of 37
IEC/IECEx
Flameproof “d”
Ex d IIC T4 Gb Ta = ‐40
o
F to +185
o
F (‐40
o
C to +85
o
C)
Supporting Standards: IEC 60079‐0:2007; IEC 60079‐1:2007
IECEx Certificate Number: IECEx FMG 11.0012X
Specific Conditions of Use:
1. ISO Class A2‐70, M5 X 16 socket‐head cap screws (Yield Stress 450 MPa) shall be
used to replace the cover fasteners.
2. ISO Class A2‐70, M5 X 16 socket‐head cap screws (Yield Stress 450 MPa) shall be
used to replace the base fasteners.
3. Consult the manufacturer if dimensional information on the flameproof joints is
necessary.
Ingress Protection
IP66 = Dust Tight, Powerful Jetting