Using Single Sheets
3.
Move the left edge guide until it locks in place next to theMove the left edge guide until it locks in place next to the
arrow the paper guide. Next adjust the right edge guide toarrow the paper guide. Next adjust the right edge guide to
match the width of your paper.match the width of your paper.
4.
Slide a sheet of paper down between the edge guides until it
meets resistance. The printer loads the paper automatically and
you are
CAUTION: Use the knob on the left side of the printer
only to clear paper jams when the printer is off.
Otherwise you may damage the printer or lose the top-
of-form position.
If the platen turns but the printer doesn’t load the paper,
completely remove the paper and reinsert it more firmly.
To eject the paper, press the
LOAD/EJECT
button.
Paper Handling 2-5
To Next Page
Loading...
