Using Single Sheets
Your printer accommodates single sheets up to a maximum width
of 257 mm (10.1 inches) on the LQ-870 and 420 mm (16.5 inches)
on the LQ-1170. You can load single sheets from either the top or
front of the printer.
If the paper-tension unit is removed, you need to replace it before
you print on single sheets. See page 1-8 in Chapter 1.
Loading single sheets from the top
1. Place the paper-release lever in the single-sheet position. Make
sure the paper guide is in the upright position.
2.
Turn on the printer. The POWER light on the control panel
comes on.
2-4
Paper Handling
To Next Page
Loading...
