DIP Switches
DIP-switch functions
This section describes the different features you can control with
the printer’s DIP switches.
International character sets
You can choose from eight international character sets by setting
DIP switches l-l, 1-2, 1-3, and 1-4, according to DIP-switch Table
3. See the Appendix for character samples.
The character sets you can select with DIP switches are USA,
France, Germany, United Kingdom, Denmark I, Sweden, Italy, and
Spain I. However, you can also select the following sets only with
the ESC R software command: Japan (English), Norway, Denmark
II, Spain II, Latin America, Korea, and Legal.
Character tables
Your printer has five graphics character tables in addition to the
italic character table. You can select these character tables by
setting DIP switches 1-1, 1-2, 1-3, and 1-4, as listed in Table 4.
To select a graphics character table, you must first turn DIP switch
1-4 on.
Tables of these characters are included in the Appendix.
Using the Printer
3-9
To Next Page
Loading...
