Cut-Sheet Feeder
3. Press the two cut-sheet feeders together while pushing firmly
on the tab locks. Make sure the two cut-sheet feeders are
securely locked together.
4. Install the assembled double-bin cut-sheet feeder on the
printer. See Installing a cut-sheet feeder in this chapter.
5.
Load paper into each bin. See the sections on loading paper in
this chapter.
You can now use either cut-sheet feeder to load paper.
Note: You can also insert single sheets using the front paper
slot.
The high-capacity cut-sheet feeder becomes BIN 1 and the single-
bin cut-sheet feeder becomes BIN 2. Select the bin number by
pressing the BIN SELECT button. The indicator light of the selected
bin comes on.
You can also specify the bin number by using software commands
as described in Chapter 8, or by using your application software as
described in your software user’s manual.
4-10 Using the Printer Options
To Next Page
Loading...
