6-28
Options
R4C0910
Rev. C
A5 size OPTIONS.FM
1/12/00 Pass 3
L
Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
2. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optinal interface slot; then
remove the plate. Be sure to keep both screws; you may need
to use them again if you re-install the shield plate.
w
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your scanner before handling the interface board.
3. Insert the Scanner I/F Card along the side guide rails into the
expansion slot in the optional interface slot.
To Next Page
Loading...
