7
Maintenance and Troubleshooting
7-31
R4C0910
Rev. C
A5 size TRBLE.FM
1/12/00 Pass 3
R
Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
2. Click
Close
to close the System Properties window.
3. Make sure your scanner is on and restart your computer.
4. When the following dialog appears, insert the scanner
software CD in the CD-ROM drive, then click
OK
.
If the following dialog appears, click
d
, then browse and
select or type in the CD-ROM drive letter,
EPSON
folder, the
folder of your preferred language, and
Win98
folder as the
location, as shown below, then click
OK
.
5. The Screen Calibration window appears. Follow the
instructions described in Chapter 3.
To Next Page
Loading...
